dmesg - Seagate Ironwolf510 empty
Linux version 5.4.0-7642-generic (buildd@lcy01-amd64-007) (gcc version 9.3.0 (Ubuntu 9.3.0-10ubuntu2)) #46~1598628707~20.04~040157c-Ubuntu SMP Fri Aug 28 18:02:16 UTC (Ubuntu 5.4.0-7642.46~1598628707~20.04~040157c-generic 5.4.44)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
BIOS-e820: [mem 0x0000000000001000-0x000000000008ffff] usable
BIOS-e820: [mem 0x0000000000090000-0x0000000000090fff] reserved
BIOS-e820: [mem 0x0000000000091000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
BIOS-e820: [mem 0x000000000a210000-0x00000000ca7c5fff] usable
BIOS-e820: [mem 0x00000000ca7c6000-0x00000000caaf2fff] reserved
BIOS-e820: [mem 0x00000000caaf3000-0x00000000cac5bfff] ACPI data
BIOS-e820: [mem 0x00000000cac5c000-0x00000000caf53fff] ACPI NVS
BIOS-e820: [mem 0x00000000caf54000-0x00000000cbbfefff] reserved
BIOS-e820: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
BIOS-e820: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000082f37ffff] usable
BIOS-e820: [mem 0x000000082f380000-0x000000082fffffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xbf06a018-0xbf07b067] usable ==> usable
e820: update [mem 0xbf06a018-0xbf07b067] usable ==> usable
e820: update [mem 0xbf050018-0xbf069257] usable ==> usable
e820: update [mem 0xbf050018-0xbf069257] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
reserve setup_data: [mem 0x0000000000001000-0x000000000008ffff] usable
reserve setup_data: [mem 0x0000000000090000-0x0000000000090fff] reserved
reserve setup_data: [mem 0x0000000000091000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009bfefff] usable
reserve setup_data: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20ffff] ACPI NVS
reserve setup_data: [mem 0x000000000a210000-0x00000000bf050017] usable
reserve setup_data: [mem 0x00000000bf050018-0x00000000bf069257] usable
reserve setup_data: [mem 0x00000000bf069258-0x00000000bf06a017] usable
reserve setup_data: [mem 0x00000000bf06a018-0x00000000bf07b067] usable
reserve setup_data: [mem 0x00000000bf07b068-0x00000000ca7c5fff] usable
reserve setup_data: [mem 0x00000000ca7c6000-0x00000000caaf2fff] reserved
reserve setup_data: [mem 0x00000000caaf3000-0x00000000cac5bfff] ACPI data
reserve setup_data: [mem 0x00000000cac5c000-0x00000000caf53fff] ACPI NVS
reserve setup_data: [mem 0x00000000caf54000-0x00000000cbbfefff] reserved
reserve setup_data: [mem 0x00000000cbbff000-0x00000000ccffffff] usable
reserve setup_data: [mem 0x00000000cd000000-0x00000000cfffffff] reserved
reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
reserve setup_data: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
reserve setup_data: [mem 0x00000000fd400000-0x00000000fd5fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000082f37ffff] usable
reserve setup_data: [mem 0x000000082f380000-0x000000082fffffff] reserved
efi: EFI v2.70 by American Megatrends
efi: ACPI=0xcac5b000 ACPI 2.0=0xcac5b014 SMBIOS=0xcba0d000 SMBIOS 3.0=0xcba0c000 MEMATTR=0xc5cc3698 ESRT=0xc8e33918
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: System manufacturer System Product Name/PRIME X570-PRO, BIOS 2606 08/13/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 3793.066 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x82f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 base 0000CB2F0000 mask FFFFFFFF0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000830000000 aka 33536M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 3327M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 4 lose cover RAM: 0G
e820: update [mem 0xcb2f0000-0xcb2fffff] usable ==> reserved
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
last_pfn = 0xcd000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000c8e33918 to 0x00000000c8e33950.
e820: update [mem 0xc8e33000-0xc8e33fff] usable ==> reserved
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x1d2801000, 0x1d2801fff] PGTABLE
BRK [0x1d2802000, 0x1d2802fff] PGTABLE
BRK [0x1d2803000, 0x1d2803fff] PGTABLE
BRK [0x1d2804000, 0x1d2804fff] PGTABLE
BRK [0x1d2805000, 0x1d2805fff] PGTABLE
BRK [0x1d2806000, 0x1d2806fff] PGTABLE
BRK [0x1d2807000, 0x1d2807fff] PGTABLE
BRK [0x1d2808000, 0x1d2808fff] PGTABLE
BRK [0x1d2809000, 0x1d2809fff] PGTABLE
BRK [0x1d280a000, 0x1d280afff] PGTABLE
BRK [0x1d280b000, 0x1d280bfff] PGTABLE
secureboot: Secure boot disabled
RAMDISK: [mem 0x7ae34000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CAC5B014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CAC5A728 0000DC (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: FACP 0x00000000CAC4B000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CAC3C000 00E2F5 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000CAF37000 000040
ACPI: SSDT 0x00000000CAC51000 008C98 (v02 AMD AmdTable 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000CAC4D000 003ACB (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAC4C000 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: FIDT 0x00000000CAC3B000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CAB3B000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
ACPI: MCFG 0x00000000CAC39000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000CAC38000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000CAC37000 000024 (v01 AMD BIXBY 00001000 INTL 20120913)
ACPI: VFCT 0x00000000CAC27000 00EC84 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: BGRT 0x00000000CAC26000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WPBT 0x00000000CAB4D000 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
ACPI: IVRS 0x00000000CAB4C000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000000)
ACPI: PCCT 0x00000000CAB4B000 00006E (v02 AMD AmdTable 00000001 AMD 00000000)
ACPI: SSDT 0x00000000CAB48000 002F29 (v02 AMD AmdTable 00000001 AMD 00000001)
ACPI: CRAT 0x00000000CAB47000 000B58 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: CDIT 0x00000000CAB46000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
ACPI: SSDT 0x00000000CAB45000 000293 (v01 AMD QOGIRDGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAB43000 0010AD (v01 AMD QOGIRTPX 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAB42000 00052C (v01 AMD QOGIRNOI 00000001 INTL 20120913)
ACPI: SSDT 0x00000000CAB3E000 003445 (v01 AMD QOGIRN 00000001 INTL 20120913)
ACPI: WSMT 0x00000000CAB3D000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: APIC 0x00000000CAB3C000 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000082f37ffff]
NODE_DATA(0) allocated [mem 0x82f355000-0x82f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000082f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008ffff]
node 0: [mem 0x0000000000091000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009bfefff]
node 0: [mem 0x000000000a000000-0x000000000a1fffff]
node 0: [mem 0x000000000a210000-0x00000000ca7c5fff]
node 0: [mem 0x00000000cbbff000-0x00000000ccffffff]
node 0: [mem 0x0000000100000000-0x000000082f37ffff]
Zeroed struct page in unavailable ranges: 21804 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000082f37ffff]
On node 0 totalpages: 8366804
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12959 pages used for memmap
DMA32 zone: 829366 pages, LIFO batch:63
Normal zone: 117710 pages used for memmap
Normal zone: 7533440 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xc6784000-0xc67c9fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09bff000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0a200000-0x0a20ffff]
PM: Registered nosave memory: [mem 0xbf050000-0xbf050fff]
PM: Registered nosave memory: [mem 0xbf069000-0xbf069fff]
PM: Registered nosave memory: [mem 0xbf06a000-0xbf06afff]
PM: Registered nosave memory: [mem 0xbf07b000-0xbf07bfff]
PM: Registered nosave memory: [mem 0xc6784000-0xc67c9fff]
PM: Registered nosave memory: [mem 0xc8e33000-0xc8e33fff]
PM: Registered nosave memory: [mem 0xca7c6000-0xcaaf2fff]
PM: Registered nosave memory: [mem 0xcaaf3000-0xcac5bfff]
PM: Registered nosave memory: [mem 0xcac5c000-0xcaf53fff]
PM: Registered nosave memory: [mem 0xcaf54000-0xcbbfefff]
PM: Registered nosave memory: [mem 0xcd000000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfd1fffff]
PM: Registered nosave memory: [mem 0xfd200000-0xfd2fffff]
PM: Registered nosave memory: [mem 0xfd300000-0xfd3fffff]
PM: Registered nosave memory: [mem 0xfd400000-0xfd5fffff]
PM: Registered nosave memory: [mem 0xfd600000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xd0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 8236048
Policy zone: Normal
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32644380K/33467216K available (14339K kernel code, 2397K rwdata, 4952K rodata, 2712K init, 4992K bss, 822836K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 44488 entries in 174 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190816
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6d59829ff4a, max_idle_ns: 881590436533 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.13 BogoMIPS (lpj=15172264)
pid_max: default: 32768 minimum: 301
efi: memattr: Entry attributes invalid: RO and XP bits both cleared
efi: memattr: ! 0x000000090000-0x000000090fff [Runtime Code |RUN| | | | | | | | | | | ]
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
*** VALIDATE tmpfs ***
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 5 3600X 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
do_IRQ: 1.55 No irq handler for vector
#2
do_IRQ: 2.55 No irq handler for vector
#3
do_IRQ: 3.55 No irq handler for vector
#4
do_IRQ: 4.55 No irq handler for vector
#5
do_IRQ: 5.55 No irq handler for vector
#6
do_IRQ: 6.55 No irq handler for vector
#7
do_IRQ: 7.55 No irq handler for vector
#8
do_IRQ: 8.55 No irq handler for vector
#9
do_IRQ: 9.55 No irq handler for vector
#10
do_IRQ: 10.55 No irq handler for vector
#11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 12 processors activated (91033.58 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20ffff] (65536 bytes)
PM: Registering ACPI NVS region [mem 0xcac5c000-0xcaf53fff] (3112960 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 08:12:00, date: 2020-10-06
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1601971919.168:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.1: [1022:1483] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.2: [1022:1483] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:01:00.0: [1bb1:5012] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:02:00.0: [1022:57ad] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 126.024 Gb/s with 16 GT/s x8 link)
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc9fffff]
pci 0000:03:01.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:01.0: enabling Extended Tags
pci 0000:03:01.0: PME# supported from D0 D3hot D3cold
pci 0000:03:05.0: [1022:57a3] type 01 class 0x060400
pci 0000:03:05.0: enabling Extended Tags
pci 0000:03:05.0: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:08.0: enabling Extended Tags
pci 0000:03:08.0: PME# supported from D0 D3hot D3cold
pci 0000:03:09.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:09.0: enabling Extended Tags
pci 0000:03:09.0: PME# supported from D0 D3hot D3cold
pci 0000:03:0a.0: [1022:57a4] type 01 class 0x060400
pci 0000:03:0a.0: enabling Extended Tags
pci 0000:03:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc9fffff]
pci 0000:04:00.0: [8086:0a54] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xfc910000-0xfc913fff 64bit]
pci 0000:04:00.0: reg 0x30: [mem 0xfc900000-0xfc90ffff pref]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:05:00.0: [8086:1539] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfc800000-0xfc81ffff]
pci 0000:05:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfc820000-0xfc823fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:05.0: PCI bridge to [bus 05]
pci 0000:03:05.0: bridge window [io 0xf000-0xffff]
pci 0000:03:05.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:06:00.0: [1022:1485] type 00 class 0x130000
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:06:00.1: [1022:149c] type 00 class 0x0c0330
pci 0000:06:00.1: reg 0x10: [mem 0xfc500000-0xfc5fffff 64bit]
pci 0000:06:00.1: enabling Extended Tags
pci 0000:06:00.1: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:06:00.3: reg 0x10: [mem 0xfc400000-0xfc4fffff 64bit]
pci 0000:06:00.3: enabling Extended Tags
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:03:08.0: PCI bridge to [bus 06]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:07:00.0: [1022:7901] type 00 class 0x010601
pci 0000:07:00.0: reg 0x24: [mem 0xfc700000-0xfc7007ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:09.0: PCI bridge to [bus 07]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfc600000-0xfc6007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:08:00.0: 63.012 Gb/s available PCIe bandwidth, limited by 16 GT/s x4 link at 0000:00:01.2 (capable of 252.048 Gb/s with 16 GT/s x16 link)
pci 0000:03:0a.0: PCI bridge to [bus 08]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:09:00.0: [1022:1470] type 01 class 0x060400
pci 0000:09:00.0: reg 0x10: [mem 0xfce00000-0xfce03fff]
pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 09-0b]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfcd00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0a:00.0: [1022:1471] type 01 class 0x060400
pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:09:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0b:00.0: [1002:687f] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:0b:00.0: reg 0x18: [mem 0xe0000000-0xe01fffff 64bit pref]
pci 0000:0b:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:0b:00.0: reg 0x24: [mem 0xfcd00000-0xfcd7ffff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfcd80000-0xfcd9ffff pref]
pci 0000:0b:00.0: BAR 0: assigned to efifb
pci 0000:0b:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:0b:00.1: [1002:aaf8] type 00 class 0x040300
pci 0000:0b:00.1: reg 0x10: [mem 0xfcda0000-0xfcda3fff]
pci 0000:0b:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:0a:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:0c:00.0: [1022:148a] type 00 class 0x130000
pci 0000:0c:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 0c]
pci 0000:0d:00.0: [1022:1485] type 00 class 0x130000
pci 0000:0d:00.0: enabling Extended Tags
pci 0000:0d:00.1: [1022:1486] type 00 class 0x108000
pci 0000:0d:00.1: reg 0x18: [mem 0xfcb00000-0xfcbfffff]
pci 0000:0d:00.1: reg 0x24: [mem 0xfcc08000-0xfcc09fff]
pci 0000:0d:00.1: enabling Extended Tags
pci 0000:0d:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:0d:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit]
pci 0000:0d:00.3: enabling Extended Tags
pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
pci 0000:0d:00.4: [1022:1487] type 00 class 0x040300
pci 0000:0d:00.4: reg 0x10: [mem 0xfcc00000-0xfcc07fff]
pci 0000:0d:00.4: enabling Extended Tags
pci 0000:0d:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 0d]
pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfccfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x2, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
iommu: Default domain type: Translated
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:0b:00.0: vgaarb: bridge control possible
pci 0000:0b:00.0: vgaarb: setting as boot device
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0xbf050018-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf06a018-0xbfffffff]
e820: reserve RAM buffer [mem 0xc6784000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc8e33000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca7c6000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x82f380000-0x82fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
*** VALIDATE bpf ***
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE ramfs ***
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd200000-0xfd2fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0200-0x021f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b00-0x0b0f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:03:01.0: PCI bridge to [bus 04]
pci 0000:03:01.0: bridge window [mem 0xfc900000-0xfc9fffff]
pci 0000:03:05.0: PCI bridge to [bus 05]
pci 0000:03:05.0: bridge window [io 0xf000-0xffff]
pci 0000:03:05.0: bridge window [mem 0xfc800000-0xfc8fffff]
pci 0000:03:08.0: PCI bridge to [bus 06]
pci 0000:03:08.0: bridge window [mem 0xfc400000-0xfc5fffff]
pci 0000:03:09.0: PCI bridge to [bus 07]
pci 0000:03:09.0: bridge window [mem 0xfc700000-0xfc7fffff]
pci 0000:03:0a.0: PCI bridge to [bus 08]
pci 0000:03:0a.0: bridge window [mem 0xfc600000-0xfc6fffff]
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0: bridge window [io 0xf000-0xffff]
pci 0000:02:00.0: bridge window [mem 0xfc400000-0xfc9fffff]
pci 0000:00:01.2: PCI bridge to [bus 02-08]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfc400000-0xfc9fffff]
pci 0000:0a:00.0: PCI bridge to [bus 0b]
pci 0000:0a:00.0: bridge window [io 0xe000-0xefff]
pci 0000:0a:00.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:0a:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
pci 0000:09:00.0: bridge window [io 0xe000-0xefff]
pci 0000:09:00.0: bridge window [mem 0xfcd00000-0xfcdfffff]
pci 0000:09:00.0: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 09-0b]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfcd00000-0xfcefffff]
pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 0c]
pci 0000:00:08.1: PCI bridge to [bus 0d]
pci 0000:00:08.1: bridge window [mem 0xfca00000-0xfccfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xfec02fff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfc400000-0xfc9fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc9fffff]
pci_bus 0000:04: resource 1 [mem 0xfc900000-0xfc9fffff]
pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
pci_bus 0000:05: resource 1 [mem 0xfc800000-0xfc8fffff]
pci_bus 0000:06: resource 1 [mem 0xfc400000-0xfc5fffff]
pci_bus 0000:07: resource 1 [mem 0xfc700000-0xfc7fffff]
pci_bus 0000:08: resource 1 [mem 0xfc600000-0xfc6fffff]
pci_bus 0000:09: resource 0 [io 0xe000-0xefff]
pci_bus 0000:09: resource 1 [mem 0xfcd00000-0xfcefffff]
pci_bus 0000:09: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0a: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0xe000-0xefff]
pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xe01fffff 64bit pref]
pci_bus 0000:0d: resource 1 [mem 0xfca00000-0xfccfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:0a:00.0: CLS mismatch (64 != 548), using 64 bytes
pci 0000:0b:00.1: D0 power state depends on 0000:0b:00.0
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 83756K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.1: Adding to iommu group 1
pci 0000:00:01.2: Adding to iommu group 2
pci 0000:00:02.0: Adding to iommu group 3
pci 0000:00:03.0: Adding to iommu group 4
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:05.0: Adding to iommu group 7
pci 0000:00:07.0: Adding to iommu group 8
pci 0000:00:07.1: Adding to iommu group 9
pci 0000:00:08.0: Adding to iommu group 10
pci 0000:00:08.1: Adding to iommu group 11
pci 0000:00:14.0: Adding to iommu group 12
pci 0000:00:14.3: Adding to iommu group 12
pci 0000:00:18.0: Adding to iommu group 13
pci 0000:00:18.1: Adding to iommu group 13
pci 0000:00:18.2: Adding to iommu group 13
pci 0000:00:18.3: Adding to iommu group 13
pci 0000:00:18.4: Adding to iommu group 13
pci 0000:00:18.5: Adding to iommu group 13
pci 0000:00:18.6: Adding to iommu group 13
pci 0000:00:18.7: Adding to iommu group 13
pci 0000:01:00.0: Adding to iommu group 14
pci 0000:02:00.0: Adding to iommu group 15
pci 0000:03:01.0: Adding to iommu group 16
pci 0000:03:05.0: Adding to iommu group 17
pci 0000:03:08.0: Adding to iommu group 18
pci 0000:03:09.0: Adding to iommu group 19
pci 0000:03:0a.0: Adding to iommu group 20
pci 0000:04:00.0: Adding to iommu group 21
pci 0000:05:00.0: Adding to iommu group 22
pci 0000:06:00.0: Adding to iommu group 18
pci 0000:06:00.1: Adding to iommu group 18
pci 0000:06:00.3: Adding to iommu group 18
pci 0000:07:00.0: Adding to iommu group 19
pci 0000:08:00.0: Adding to iommu group 20
pci 0000:09:00.0: Adding to iommu group 23
pci 0000:0a:00.0: Adding to iommu group 24
pci 0000:0b:00.0: Adding to iommu group 25
pci 0000:0b:00.0: Using iommu direct mapping
pci 0000:0b:00.1: Adding to iommu group 26
pci 0000:0c:00.0: Adding to iommu group 27
pci 0000:0d:00.0: Adding to iommu group 28
pci 0000:0d:00.1: Adding to iommu group 29
pci 0000:0d:00.3: Adding to iommu group 30
pci 0000:0d:00.4: Adding to iommu group 31
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
*** VALIDATE fuse ***
*** VALIDATE fuse ***
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.1: AER: enabled with IRQ 27
pcieport 0000:00:01.2: AER: enabled with IRQ 28
pcieport 0000:00:03.1: AER: enabled with IRQ 29
pcieport 0000:00:07.1: AER: enabled with IRQ 31
pcieport 0000:00:08.1: AER: enabled with IRQ 32
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:06:00.1: xHCI Host Controller
xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 1
xhci_hcd 0000:06:00.1: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb1: SerialNumber: 0000:06:00.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:06:00.1: xHCI Host Controller
xhci_hcd 0000:06:00.1: new USB bus registered, assigned bus number 2
xhci_hcd 0000:06:00.1: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb2: SerialNumber: 0000:06:00.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb3: SerialNumber: 0000:06:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
xhci_hcd 0000:06:00.3: xHCI Host Controller
xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb4: SerialNumber: 0000:06:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0d:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb5: SerialNumber: 0000:0d:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:0d:00.3: xHCI Host Controller
xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:0d:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.4.0-7642-generic xhci-hcd
usb usb6: SerialNumber: 0000:0d:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701021
microcode: CPU1: patch_level=0x08701021
microcode: CPU2: patch_level=0x08701021
microcode: CPU3: patch_level=0x08701021
microcode: CPU4: patch_level=0x08701021
microcode: CPU5: patch_level=0x08701021
microcode: CPU6: patch_level=0x08701021
microcode: CPU7: patch_level=0x08701021
microcode: CPU8: patch_level=0x08701021
microcode: CPU9: patch_level=0x08701021
microcode: CPU10: patch_level=0x08701021
microcode: CPU11: patch_level=0x08701021
microcode: Microcode Update Driver: v2.2.
*** VALIDATE rdt ***
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (536479693, 312306049)->(964135212, -115349470)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8eb219446f380a0482c8ecdb8dcaeec89b6092cd'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 8:489:219
acpi device:3d: hash matches
acpi PNP0C08:03: hash matches
memory memory101: hash matches
rtc_cmos 00:02: setting system clock to 2020-10-06T08:12:00 UTC (1601971920)
acpi_cpufreq: overriding BIOS provided _PSD data
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2712K
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1192K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
dca service started, version 1.12.1
nvme nvme0: pci function 0000:01:00.0
nvme nvme1: pci function 0000:04:00.0
ahci 0000:07:00.0: version 3.0
ahci 0000:07:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0xc impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700200 irq 66
ata4: SATA max UDMA/133 abar m2048@0xfc700000 port 0xfc700280 irq 67
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x30 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
cryptd: max_cpu_qlen set to 1000
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: DUMMY
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600300 irq 89
ata10: SATA max UDMA/133 abar m2048@0xfc600000 port 0xfc600380 irq 90
pps pps0: new PPS source ptp0
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 04:d9:f5:7d:09:72
igb 0000:05:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:05:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
igb 0000:05:00.0 enp5s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xe0000000 -> 0xe01fffff
amdgpu 0000:0b:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfcd00000 -> 0xfcd7ffff
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:0b:00.0: vgaarb: deactivate vga console
amdgpu 0000:0b:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1DA2:0xE37F 0xC1).
[drm] register mmio base: 0xFCD00000
[drm] register mmio size: 524288
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
ATOM BIOS: 113-D0500110-O01
[drm] UVD(0) is enabled in VM mode
[drm] UVD(0) ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:0b:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
amdgpu 0000:0b:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
amdgpu 0000:0b:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 2048bits HBM
[TTM] Zone kernel: Available graphics memory: 16430610 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 8176M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x000000F400900000).
[drm] use_doorbell being set to: [true]
[drm] use_doorbell being set to: [true]
amdgpu: [powerplay] hwmgr_sw_init smu backed is vega10_smu
[drm] Found UVD firmware Version: 66.43 Family ID: 17
[drm] PSP loading UVD firmware
[drm] Found VCE firmware Version: 57.6 Binary ID: 4
[drm] PSP loading VCE firmware
nvme nvme1: Shutdown timeout set to 6 seconds
nvme nvme1: 32/0/0 default/read/poll queues
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: Shutdown timeout set to 10 seconds
nvme nvme0: 8/0/0 default/read/poll queues
nvme1n1: p1 p2 p3 p4
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 5-3: new full-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
[drm] reserve 0x400000 from 0xf5fe800000 for PSP TMR
usb 3-1: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Mass Storage Device
usb 3-1: Manufacturer: Generic
usb 3-1: SerialNumber: 058F63666471
usb-storage 3-1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
usb 1-1: Manufacturer: GenesysLogic
[drm] Display Core initialized with v3.2.48!
usb 5-3: New USB device found, idVendor=12cf, idProduct=0c02, bcdDevice= 0.21
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-3: Product: MAD CATZ R.A.T. 2+ gaming mouse
usb 5-3: Manufacturer: MAD CATZ R.A.T. 2+ gaming mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.0/0003:12CF:0C02.0001/input/input3
hid-generic 0003:12CF:0C02.0001: input,hidraw0: USB HID v1.11 Mouse [MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse] on usb-0000:0d:00.3-3/input0
input: MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse Keyboard as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:12CF:0C02.0002/input/input4
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: SanDisk Ultra II 480GB, X41100RL, max UDMA/133
ata4.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA
hub 1-1:1.0: USB hub found
ata4.00: configured for UDMA/133
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-8: WDC WD10EARX-00N0YB0, 51.0AB51, max UDMA/133
ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
hub 1-1:1.0: 4 ports detected
ata9.00: configured for UDMA/133
ata3.00: ATAPI: HL-DT-ST BD-RE BH10NS30, 1.00, max UDMA/133
ata10.00: NCQ Send/Recv Log not supported
ata10.00: ATA-9: Samsung SSD 845DC EVO 960GB, EXT03X3Q, max UDMA/133
ata10.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata3.00: configured for UDMA/133
ata10.00: NCQ Send/Recv Log not supported
ata10.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH10NS30 1.00 PQ: 0 ANSI: 5
usb 3-2: new full-speed USB device number 3 using xhci_hcd
input: MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:12CF:0C02.0002/input/input5
input: MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse as /devices/pci0000:00/0000:00:08.1/0000:0d:00.3/usb5/5-3/5-3:1.1/0003:12CF:0C02.0002/input/input6
hid-generic 0003:12CF:0C02.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [MAD CATZ R.A.T. 2+ gaming mouse MAD CATZ R.A.T. 2+ gaming mouse] on usb-0000:0d:00.3-3/input1
usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB3.1 Hub
usb 2-1: Manufacturer: GenesysLogic
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD and UVD ENC initialized successfully.
usb 3-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-2: Product: CSR8510 A10
usb 1-2: new high-speed USB device number 3 using xhci_hcd
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x687f:0x1002]
kfd kfd: added device 1002:687f
[drm] fb mappable at 0xD0CF2000
[drm] vram apper at 0xD0000000
[drm] size 19906560
[drm] fb depth is 24
[drm] pitch is 13824
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:0b:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:0b:00.0: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:0b:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:0b:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:0b:00.0: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:0b:00.0: ring page0 uses VM inv eng 1 on hub 1
amdgpu 0000:0b:00.0: ring sdma1 uses VM inv eng 4 on hub 1
amdgpu 0000:0b:00.0: ring page1 uses VM inv eng 5 on hub 1
amdgpu 0000:0b:00.0: ring uvd_0 uses VM inv eng 6 on hub 1
amdgpu 0000:0b:00.0: ring uvd_enc_0.0 uses VM inv eng 7 on hub 1
amdgpu 0000:0b:00.0: ring uvd_enc_0.1 uses VM inv eng 8 on hub 1
amdgpu 0000:0b:00.0: ring vce0 uses VM inv eng 9 on hub 1
amdgpu 0000:0b:00.0: ring vce1 uses VM inv eng 10 on hub 1
amdgpu 0000:0b:00.0: ring vce2 uses VM inv eng 11 on hub 1
[drm] ECC is not present.
[drm] SRAM ECC is not present.
[drm] Initialized amdgpu 3.35.0 20150101 for 0000:0b:00.0 on minor 0
sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 8:0:0:0: Direct-Access ATA WDC WD10EARX-00N AB51 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 8:0:0:0: [sdb] 4096-byte physical blocks
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 9:0:0:0: Direct-Access ATA Samsung SSD 845D 3X3Q PQ: 0 ANSI: 5
ata10.00: Enabling discard_zeroes_data
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata10.00: Enabling discard_zeroes_data
sdc: sdc1
ata10.00: Enabling discard_zeroes_data
sd 9:0:0:0: [sdc] Attached SCSI disk
sda: sda1
sd 3:0:0:0: [sda] Attached SCSI disk
usb 3-4: new full-speed USB device number 4 using xhci_hcd
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI disk
usb 1-2: New USB device found, idVendor=045e, idProduct=0779, bcdDevice= 1.06
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Microsoft® LifeCam HD-3000
usb 1-2: Manufacturer: Microsoft
tsc: Refined TSC clocksource calibration: 3792.875 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d581b92771, max_idle_ns: 881590605997 ns
clocksource: Switched to clocksource tsc
usb 1-1.2: new high-speed USB device number 4 using xhci_hcd
usb 3-4: config 1 has an invalid interface number: 2 but max is 1
usb 3-4: config 1 has no interface number 1
usb 3-4: New USB device found, idVendor=0b05, idProduct=18f3, bcdDevice= 1.00
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: AURA LED Controller
usb 3-4: Manufacturer: AsusTek Computer Inc.
usb 3-4: SerialNumber: 9876543210
hid-generic 0003:0B05:18F3.0003: hiddev1,hidraw2: USB HID v1.11 Device [AsusTek Computer Inc. AURA LED Controller] on usb-0000:06:00.3-4/input2
usb 1-1.2: New USB device found, idVendor=05ac, idProduct=12a6, bcdDevice= 3.30
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: iPad
usb 1-1.2: Manufacturer: Apple Inc.
usb 1-1.2: SerialNumber: 29dfe89e165810ee08eda72e9f00ea551442bac7
usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
usb 2-1.4: New USB device found, idVendor=05e3, idProduct=0612, bcdDevice=92.26
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4: Product: USB3.1 Hub
usb 2-1.4: Manufacturer: GenesysLogic
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
system76_acpi: loading out-of-tree module taints kernel.
system76_acpi: module verification failed: signature and/or required key missing - tainting kernel
system76: Model does not utilize this driver
usbcore: registered new interface driver system76-io
usb 1-3: new high-speed USB device number 5 using xhci_hcd
raid6: avx2x4 gen() 41048 MB/s
raid6: avx2x4 xor() 19335 MB/s
scsi 10:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
sd 10:0:0:0: Attached scsi generic sg4 type 0
raid6: avx2x2 gen() 38910 MB/s
usb 1-3: New USB device found, idVendor=20b1, idProduct=3008, bcdDevice= 5.30
usb 1-3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 1-3: Product: iFi (by AMR) HD USB Audio
usb 1-3: Manufacturer: iFi (by AMR)
usb 1-3: SerialNumber: 00000000
raid6: avx2x2 xor() 25052 MB/s
hid-generic 0003:20B1:3008.0004: hiddev2,hidraw3: USB HID v1.10 Device [iFi (by AMR) iFi (by AMR) HD USB Audio] on usb-0000:06:00.1-3/input3
raid6: avx2x1 gen() 21229 MB/s
usb 1-1.4: new high-speed USB device number 6 using xhci_hcd
raid6: avx2x1 xor() 18539 MB/s
raid6: sse2x4 gen() 19815 MB/s
usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.26
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB2.0 Hub
usb 1-1.4: Manufacturer: GenesysLogic
raid6: sse2x4 xor() 11434 MB/s
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
raid6: sse2x2 gen() 19156 MB/s
raid6: sse2x2 xor() 12706 MB/s
raid6: sse2x1 gen() 9127 MB/s
raid6: sse2x1 xor() 9240 MB/s
raid6: using algorithm avx2x4 gen() 41048 MB/s
raid6: .... xor() 19335 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
sd 10:0:0:0: [sdd] Attached SCSI removable disk
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.2pop1~1599007796~20.04~a50f405 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice Cryptsetup Units Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Started Nameserver information manager.
systemd[1]: Reached target Network (Pre).
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Uncomplicated firewall.
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Starting Create System Users...
systemd[1]: Finished Load/Save Random Seed.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Starting Helper to synchronize boot up for ifupdown...
systemd[1]: Finished Helper to synchronize boot up for ifupdown.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Started Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.
systemd[1]: Started Journal Service.
systemd-journald[730]: Received client request to flush runtime journal.
ccp 0000:0d:00.1: enabling device (0000 -> 0002)
FAT-fs (nvme1n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
mc: Linux media interface: v0.10
FAT-fs (nvme1n1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ccp 0000:0d:00.1: ccp enabled
asus_wmi: ASUS WMI generic driver loaded
videodev: Linux video capture interface: v2.00
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
kvm: disabled by bios
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
uvcvideo: Found UVC 1.00 device Microsoft® LifeCam HD-3000 (045e:0779)
usbcore: registered new interface driver btusb
uvcvideo 1-2:1.0: Entity type for entity Extension 5 was not initialized!
uvcvideo 1-2:1.0: Entity type for entity Processing 4 was not initialized!
uvcvideo 1-2:1.0: Entity type for entity Selector 3 was not initialized!
uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
input: Microsoft® LifeCam HD-3000: Mi as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_intel 0000:0b:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:0b:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:0d:00.4: enabling device (0000 -> 0002)
snd_hda_intel 0000:0b:00.1: bound 0000:0b:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input9
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input10
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input11
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input12
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input13
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:09:00.0/0000:0a:00.0/0000:0b:00.1/sound/card0/input14
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC2D0: inputs:
snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input15
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input16
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input17
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input18
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input19
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input20
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0d:00.4/sound/card2/input21
snd_hda_intel 0000:0d:00.4: device 1043:8733 is on the power_save blacklist, forcing power_save to 0
Adding 4193784k swap on /dev/mapper/cryptswap. Priority:-2 extents:1 across:4193784k SSFS
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
usb 1-3: 1:2 : unsupported format bits 0x100000000
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
usbcore: registered new interface driver snd-usb-audio
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
audit: type=1400 audit(1601971933.575:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1237 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1241 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1238 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1243 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1243 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ippusbxd" pid=1242 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1246 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1245 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1245 comm="apparmor_parser"
audit: type=1400 audit(1601971933.575:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1245 comm="apparmor_parser"
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
NET: Registered protocol family 38
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
ipheth 1-1.2:4.2: Apple iPhone USB Ethernet device attached
usbcore: registered new interface driver ipheth
ipheth 1-1.2:4.2 enx76e1b67e7f2e: renamed from eth0
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
kvm: disabled by bios
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
rfkill: input handler disabled
igb 0000:05:00.0 enp5s0: igb: enp5s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3792877789 Hz
vboxdrv: Successfully loaded version 6.1.10_Ubuntu (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
bpfilter: Loaded bpfilter_umh pid 2205
Started bpfilter
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler enabled
rfkill: input handler disabled
usb 1-4: new high-speed USB device number 7 using xhci_hcd
usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.36
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: 4-Port USB 2.0 Hub
usb 1-4: Manufacturer: Generic
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 3 ports detected
usb 1-4.3: new full-speed USB device number 8 using xhci_hcd
usb 1-4.3: not running at top speed; connect to a high speed hub
usb 1-4.3: New USB device found, idVendor=0bda, idProduct=5400, bcdDevice= 1.07
usb 1-4.3: New USB device strings: Mfr=17, Product=18, SerialNumber=19
usb 1-4.3: Product: BillBoard Device
usb 1-4.3: Manufacturer: Realtek
usb 1-4.3: SerialNumber: 123456789ABCDEFGH
usb 1-4.2: new full-speed USB device number 9 using xhci_hcd
usb 1-4.2: New USB device found, idVendor=056a, idProduct=030e, bcdDevice= 1.00
usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4.2: Product: Intuos PS
usb 1-4.2: Manufacturer: Wacom Co.,Ltd.
hid-generic 0003:056A:030E.0005: hiddev3,hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:06:00.1-4.2/input0
hid-generic 0003:056A:030E.0006: hiddev4,hidraw5: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:06:00.1-4.2/input1
input: Wacom Co.,Ltd. Intuos PS as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-4/1-4.2/1-4.2:1.2/0003:056A:030E.0007/input/input22
hid-generic 0003:056A:030E.0007: input,hidraw6: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PS] on usb-0000:06:00.1-4.2/input2
input: Wacom Intuos S Pen as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-4/1-4.2/1-4.2:1.0/0003:056A:030E.0005/input/input23
wacom 0003:056A:030E.0005: hidraw4: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:06:00.1-4.2/input0
input: Wacom Intuos S Pad as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/0000:03:08.0/0000:06:00.1/usb1/1-4/1-4.2/1-4.2:1.1/0003:056A:030E.0006/input/input28
wacom 0003:056A:030E.0006: hidraw5: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PS] on usb-0000:06:00.1-4.2/input1
kauditd_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1601971990.356:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/libdrm/amdgpu.ids" pid=3879 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1601972001.478:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/kg/.thunderbird/profiles.ini" pid=3877 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1601972001.478:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/kg/.thunderbird/yehb4onc.default-release/cert9.db" pid=3877 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
audit: type=1400 audit(1601972001.478:33): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/kg/.thunderbird/yehb4onc.default-release/cert9.db" pid=3877 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
audit: type=1400 audit(1601972001.478:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/kg/.thunderbird/yehb4onc.default-release/key4.db" pid=3877 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
audit: type=1400 audit(1601972001.478:35): apparmor="ALLOWED" operation="file_lock" profile="libreoffice-soffice" name="/home/kg/.thunderbird/yehb4onc.default-release/key4.db" pid=3877 comm="soffice.bin" requested_mask="k" denied_mask="k" fsuid=1000 ouid=1000
audit: type=1400 audit(1601972015.038:36): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/zoneinfo64.res" pid=3877 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1601972015.038:37): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/zoneinfo-icu/44/le/timezoneTypes.res" pid=3877 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
sr 2:0:0:0: [sr0] CDROM not ready. Make sure there is a disc in the drive.